By The Robo Reliance Team
Robot demand in North America had its best quarter of the year. According to the Association for Advancing Automation (A3), companies ordered 10,989 robots worth about $723.5 million in the third quarter of 2026, up 24.8 percent in units from a year earlier. Collaborative robots stood out. Cobot orders reached 1,831 units, roughly 56 percent more than the same quarter last year, and made up about one in six robots ordered.
The industry mix matters too. Through the first nine months, A3 says cobots accounted for 43.8 percent of robot orders in life sciences, pharma, and biomed, and 36.9 percent in semiconductors and electronics.
That is good news for automation. It also raises a question most cobot buyers do not ask until something stops: once the integrator leaves, who keeps these things running?
Why cobots change the service question
Cobots are sold on simplicity. Smaller footprint, lighter payloads, easier programming, often no full safety cage. That pitch is mostly true, and it is exactly why cobots end up in places that have never owned a robot before. A contract manufacturer adding a machine-tending cell. A lab automating sample handling. A plant with one controls engineer who already has a full-time job.
Traditional industrial robot buyers, like large automotive plants, usually have robotics technicians on staff, spare parts on the shelf, and years of maintenance habits. Many first-time cobot buyers have none of that. The robot is simple to deploy. The support structure around it does not come in the box.
What actually goes wrong
Cobots do not usually fail in dramatic ways. They drift. A gripper wears and starts dropping parts. A camera gets bumped and the cell starts mis-picking. A program gets edited during a changeover and nobody writes down what changed. Joint and cable wear accumulates on arms that run more cycles than anyone planned for. A firmware update shows up and nobody is sure whether to install it.
Each of these is small. Together, they are how a cell that hit its numbers in month one is running at half speed in month ten, with a workaround that only one operator knows.
The cost is simple to see once you look. Say a cobot cell runs two shifts, five days a week, or 80 hours. If it sits idle for four hours waiting on someone who can diagnose it, you have lost 5 percent of that week’s capacity from one event. Repeat that a few times a month and the payback math the purchase was built on starts to slip.
The ownership gap
In many cobot deployments, responsibility is split in a way that leaves a hole in the middle:
The manufacturer supports the arm and its software, usually through documentation, a help desk, and a warranty.
The integrator designed the cell, tooling, and program, and has moved on to the next project.
The plant owns the outcome but often has no one assigned to the robot as part of their job.
When something goes wrong, the first hour is often spent figuring out whose problem it is. That is not anyone’s fault. It is a planning gap, and it can be closed before the robot ever arrives.
Questions to answer before the purchase order
If you are adding cobots in 2027, settle these up front:
Who on site owns this cell day to day, by name, with time actually set aside for it?
What first-level checks can that person handle, like resets, gripper swaps, recalibration, and basic diagnostics, and have they been trained on them?
Which wear parts and spares should be on the shelf, and who reorders them?
Where does the program live, who is allowed to change it, and how is each change recorded?
What is the preventive maintenance schedule, and is it based on actual run hours and cycles rather than the calendar?
When the issue goes beyond first-level, who do you call for each brand on your floor, and is that path written down?
What happens to support if the integrator is booked or the cell layout changes?
None of these questions are hard. They just tend to get skipped because the cobot was sold as the easy option.
Plan for more than one brand
The fast growth in cobots also means many plants will end up with a mix of brands across different cells, bought at different times for different jobs. Each comes with its own software, parts, and support channel. That works fine at two robots. At twelve, it becomes a coordination job of its own.
This is where a vendor-agnostic service partner helps. Robo Reliance works across brands and robot types, so a plant has one team that handles preventive maintenance, troubleshooting, and repairs on the whole floor instead of managing a separate relationship for every arm.
The bottom line
Cobots are one of the best things to happen to automation for companies that could never justify a full robotic line. But easy to deploy is not the same as easy to own. The buyers who get the full return will be the ones who plan the service side with the same care they put into the cell design.
If you are adding cobots or already running a mixed fleet and want a clear service plan, talk to Robo Reliance.
https://www.roboreliance.com | 800-838-0156 | info@roboreliance.com
Photo: Franck V. on Unsplash
